Filter
Top Products
4 Replacement Procedures 4.27 PC card slot
4.27 PC card slot
Removing the PC card slot
The following describes the procedure for removing the PC card slot (See Figure 4-40).
1. Remove the following screws securing the PC card slot.
M2.0x3.0B S-THIN FLAT BIND screw x2
M2.0x8.0B BIND screw x2
2. Pull up the PC card slot straight and remove it from the connector CN2110 on the
system board.
PC card slot
CN2110
M2.0x8.0B BIND
M2.0x3.0B S-THIN FLAT BIND
Figure 4-40 Removing the PC card slot
QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] 4-63