Filter
Top Products
4 Replacement Procedures 4.14 SJ board / Internal Microphone
4.14.2 Internal Microphone
Removing the Internal microphone
The following describes the procedure for removing the internal microphone (See Figure 4-
24).
1. Remove the following screw securing the internal microphone and remove the
internal microphone assembly.
M2.5x4.0B FLAT BIND screw x1
2. Pull out the internal microphone from the mic holder.
M2.5x4.0B FLAT BIND
Internal microphone
Mic holder
Figure 4-24 Removing the internal microphone
Installing the Internal microphone
The following describes the procedure for installing the internal microphone (See Figure 4-
24).
1. Install the internal microphone to the mic holder.
2. Install the internal microphone assembly and secure it with the following screw.
M2.5x4.0B FLAT BIND screw x1
QOSMIO G20 Maintenance Manual (960-511) [CONFIDENTIAL] 4-41