Filter
Top Products
4.11 AV-IN board 4 Replacement Procedures
4.11 AV-IN board
Removing the AV-IN board
The following describes the procedure for removing the AV-IN board (See Figure 4-17).
1. Remove the following screw securing the AV-IN board.
M2.5x4.0B FLAT BIND screw x1
2. Remove AV-IN board from the bottom cover assembly.
M2.5x4.0B FLAT BIND
AV-IN board
Figure 4-17 Removing the AV-IN board
Installing the AV-IN board
The following describes the procedure for installing the AV-IN board (See Figure 4-17).
1. Install the AV-IN board to the bottom cover assembly and secure it with the
following screw.
M2.5x4.0B FLAT BIND screw x1
4-32 [CONFIDENTIAL] QOSMIO G20 Maintenance Manual (960-511)