Filter
Top Products
3 Tests and Diagnostics 3.29 SETUP
3.29.2 Accessing the SETUP Program
Selecting 0 from the DIAGNOSTICS MENU and pressing Enter displays the TSETUP
screen. The TSETUP screen is divided into two pages: SYSTEM SETUP (1/2) and SYSTEM
SETUP (2/2).
Boot Priority =HDD→FDD→CD-ROM→LAN
HDD Rriority
=Built-in HDD→Second HDD→PC Card
Power-up mode = Boot
CPU Cache = Enabled
Level 2 Cache = Enabled
Dynamic CPU Frequency Mode
= Dynamically Switchable
Auto Power On = Disabled
Panel Power On/Off = Disabled
SYSTEM SETUP (1/2) ACPI BIOS version = X.XX
Date (MM-DD-YYYY) =XX-XX-XXXX
Time (HH:MM:SS) =XX:XX:XX
Total = XXXXXXKB
MEMORY
Not Registerd
BOOT PRIORITY
PASSWORD
Battery Save Mode = Full Power
BATTERY
OTHERS
SYSTEM DATE/TIME
Power On Display = Auto-Selected
TV Type = NTSC
DISPLAY
HDD = Built-in HDD
HDD Password Mode = User only
User Password = Not Registered
HDD PASSWORD
Controller Mode = Auto-Selected
Device Config. = Setup by OS
CONFIGURATION
PCI BUS = IRQ11
Serial = COM1(3F8H/IRQ4)
Parallel = LPT1(378/IRQ7/ch3)
SYSTEM SETUP (2/2) ACPI BIOS version = X.XX
PC CARD
I/O PORTS
PCI BUS
↑↓→←: Select items
Space, BkSp
: Change values
PgDn, PgUp
: Change pages
Esc
: Exit without saving
Home
: Set default values
End
: Save changes and Exit
Built-in LAN = Enabled
PCI LAN
USB KB/Mouse Legacy Emulation
= Enabled
USB-FDD Legacy Emulation
=
En
ab
l
ed
LEGACY EMULATION
Built-in HDD
= Primary IDE(1F0H/IRG14)
Select Bay
=Secondary IDE(170H/IRQ15)
DRIVES I
/
O
Internal Pointing Device =Enabled
Ext kayboard “Fn” =Disabled
Parallel Port Mode =ECP
Hard Disk Mode =Enhanced
PERIPHERAL
3-80 TECRA M1 Maintenance Manual (960-436)