Filter
Top Products
4.15 Display Assembly 4 Replacement Procedures
4.15 Display Assembly
Removing the Display Assembly
To remove the display assembly, follow the steps below and refer to figures
4-26 to 4-28.
1. Turn the computer face down, and remove the following nine screws:
• M2.5×4 FLAT HEAD screw ×3 (“4” in the figure below)
• M2.5×16 FLAT HEAD screw ×6 (“16” in the figure below)
Figure 4-26 Removing the Display assembly (1)
TECRA M1 Maintenance Manual (960-436) 4-49