Filter
Top Products
4 Replacement Procedures 4.22 FL Inverter
4.22 FL Inverter
Removing the FL Inverter
To remove the FL inverter, follow the steps below and refer to figure 4-38.
1. Remove the following screw securing the FL inverter.
• M2×3 SUPER FLAT screw ×1
2. Disconnect the FL cable under the insulator from the FL inverter.
3. Disconnect the HV cable from the FL inverter.
4. Remove the FL inverter.
Figure 4-38 Removing the FL inverter
4-68 TECRA M1 Maintenance Manual (960-436)