Filter
Top Products
4 Replacement Procedures 4.25 Fluorescent Lamp
4.25.2 Replacing the 14.1-inch SXGA+ Sharp Fluorescent Lamp
CAUTION: When replacing the fluorescent lamp, wear finger covers or gloves to avoid
contaminating or damaging the LCD panel. Be careful not to let dust or other foreign
substance into the module.
Disassembling the 14.1-inch SXGA+ Sharp Fluorescent Lamp
To disassemble the 14.1-inch SXGA+ Sharp fluorescent lamp, follow the steps below and
refer to figures4-62 to 4-71.
1. Turn the LCD module face down, and remove the protection cover S (A), protection
cover G (B), aluminum tape (C) and fixing tape for lead wire (D).
NOTE: 1) Be careful not to damage the TCP or chips.
2) Discard the tapes removed.
Figure 4-62 Replacing Sharp fluorescent lamp (SXGA+) (1)
4-98 TECRA M1 Maintenance Manual (960-436)