Filter
Top Products
4.24 Wireless LAN Antenna/Bluetooth Antenna/Display Cover/Speaker 4 Replacement Procedures
4. Turn the display assembly face up and open the display cover. Remove the following
screws securing the two hinges to the display cover.
• M2.5×5 FLAT HEAD screw ×2
Figure 4-44 Removing the Hinge (1)
5. Remove the display cover from the display assembly. Be careful not to pinch or
damage the LCD cable.
6. Remove the internal microphone from the guide pin.
TECRA M1 Maintenance Manual (960-436) 4-77