Filter
Top Products
4.25 Fluorescent Lamp 4 Replacement Procedures
6. Sticking tapes and insulation sheets
1) Stick the Y-PCB insulation sheet and X-PCB insulation sheet in order.
2) Stick the two bezel tapes on the lower side (lamp side).
3) Stick the fixing tape for FL cable.
NOTE: Be careful not to damage to the TAB or the pulling-out part of lamp
cable when sticking the tapes and insulation sheets.
Figure 4-61 Replacing TOSHIBA fluorescent lamp (XGA) (11)
TECRA M1 Maintenance Manual (960-436) 4-97