Tripp Lite B022-U08-IP Switch User Manual


  Open as PDF
of 59
 
21
6. KVM Operation
(
continued
)
6.6.4 Remote Auto Scan
6.6.5 Panel Array Mode
When Auto Scan ModeisinvokedviatheremoteOSDtoolbar,the
KVMbeginsscanningaccordingtotheScan Select and Scan Duration
settings in the ConfigurationtaboftheremoteOSD.Duringanauto
scan,normalkeyboardandmousefunctionalityissuspended.Keyboard
functionality is limited to the [Spacebar] key (exits auto scan at
currently selected port), [Esc] key (exits auto scan at the currently
selected port), [P] key (pauses auto scan at the currently selected port)
and the [Ctrl], [Alt], [Delete]commandforthelocalcomputer.Mouse
functionality is limited to the auto scan toolbar, which replaces the
remoteOSDtoolbar.Theiconsintheautoscantoolbararedescribedin
the table:
Icon Description
Indicates that the currently selected port is being accessed in Auto Scan Mode.
Pauses the auto scan at the currently selected port.
Exits auto scan at the currently selected port
Displays the port ID according to the Display Mode setting in the Configuration tab of the remote OSD or the F3 Set page of the local
OSD.
Panel Array Mode allows connected computers to be simultaneously
monitored by dividing the screen into a grid of panels, with each panel
representingaKVMport.WhenPanel Array Mode is invoked via the
remoteOSDtoolbar,itscanstheconnectedcomputerspertheScan
Select setting in the ConfigurationtaboftheremoteOSD.
A panel array toolbar is located in the lower right corner of the panel
array mode screen. As with the other toolbars, the panel array mode
toolbar can be dragged to anywhere on the screen. The table describes
the icons located in the panel array toolbar:
Icon Description
Moves the focus of the panel array scan back four panels.
Moves the focus of the panel array scan back one panel.
Pauses the panel array mode scan, leaving the focus on the
currently highlighted panel.
Moves the focus of the panel array scan forward one panel.
Moves the focus of the panel array scan forward four panels.
Increases the number of panels displayed in panel array mode.
Decreases the number of panels displayed in panel array
mode.
Toggles the 4/3 aspect ratio.
Exits panel array mode at the currently highlighted port.
 previous next