Tripp Lite B022-U08-IP Switch User Manual


  Open as PDF
of 59
 
25
7. Administration
AdministrationoftheKVMswitchcanbedonethroughthreedifferentinterfaces;LocalConsoleOSD,WebInterfaceandRemoteOSD.TheWeb
InterfaceandRemoteOSDgiveyouthemostadministrativeaccesstotheKVM,whereasthesettingsintheLocalOSDaremorelimited.Thetable
details which settings are available in each interface, and whether those settings are accessible to Administrators, ordinary Users or both. The rest of
this chapter goes into these interfaces and their settings in more detail.
Local OSD Remote OSD Web Managment Interface
User Admin User Admin User Admin
Set Language of OSD/GUI X X X X X X
Set Ports to Be Displayed in OSDs X X X X
OSD Hotkey X X X X
Port ID Display Mode X X X X
Port ID Display Duration X X X X
Scan Select X X X X
Scan Duration X X X X
Screen Blanker X X X X
Logout Timeout X X X
Beeper X X X
Edit Port Names X X X
Set Port Operating Systems X X
Hotkey Command Mode (On/Off) X X
Hotkey X X
Port ID Display Position X X
Reset Station IDs X
Set Local Keyboard Language X
Setup IP Address X X X
View Firmware Version X X X
Firmware Upgrade X X X
Reset Default Values X X X
Clear Port Names X X X
View Device Name X X
View MAC Address X X
Add, Edit and Remove Administrators/Users X X
Port Access - Full/View Only/No Access X X
Setup DNS Server Address X X
IP Installer Settings - Enabled/View Only/Disabled X
Enable and Setup RADIUS and LDAP Servers X X
Log Server Settings - MAC Address and Port Settings X X
Enable and Setup IP Address Filters X X
Enable and Setup MAC Address Filters X X
Set a Default Web Page Name X X
Login Failure Settings X X
Enable/Disable ICMP, Browser, Device List, Multiuser
and Force All to Grayscale
X X
Mouse Sync Mode - Automatic/Manual X X
Backup and Restore System Configuration and User Accounts X
 previous next