Tripp Lite B022-U08-IP Switch User Manual


  Open as PDF
of 59
 
40
7.2.3 Remote OSD Administration Tab
(
continued
)
7. Administration
(
continued
)
Using the New Schema
To use the new schema, do the following:
1. Savethenewschemafile(e.g.,B022-U08-IP.schema)inthe/
OpenLDAP/ schema/ directory.
2. Add the new schema to the slapd.conf file, as shown in the figure:
3. RestarttheLDAPserver.
4. WritetheLDIFfileandcreatethedatabaseentriesininit.ldif with
the ldapadd command, as shown in the following example: ldapadd
-f init.ldif -x -D “cn=Manager,dc=tripplite,dc=com” -w secret
ANMS – Log Server Settings
Also included in the ANMS screen are settings that are required for the
Windows-basedlogserver;MAC Address and Port. If these settings are
not entered correctly, the log server will not be able to communicate
withandpullloginformationfromtheKVMswitch.
• MACAddress:EntertheMACaddressofthecomputerthatthe
Windows-basedlogserverwasinstalledonhere.
• Port:Enter the firewall access port being used to communicate with
theWindows-basedlogserverhere.
Security
The Security page controls IP access by filtering the range of IP
addressesand/orMACaddressesthatcanaccesstheKVMswitch.IP
andMACaddressfilterscontrolaccesstotheKVMswitchbasedon
theIPand/orMACaddressesofthecomputersattemptingtoconnect.
Amaximumof100IPfiltersand100MACfiltersareallowed.
If any filters have been configured, they appear in the IP filter and/or
MAC filter list boxes.
To remove a filter from the list, simply click on it and hit the
corresponding Remove button.
Note: When clicking the Remove button, you are not prompted to
confirm the removal of the filter, it is automatically removed.
To edit a filter, simply click on it and hit the corresponding Edit button.
Adding/Editing a Filter
1. Check the IP Filter Enable or MAC Filter Enable checkbox.
2. Click on the corresponding Add button, or highlight the desired
filter and click on the corresponding Edit button. The IP Filter or
MAC Filter entry box appears.
3. IP filters contain From and To address fields, which allow you to
filter a range of IP addresses. If you only want to filter a single IP
address, just enter the same address into both the From and To
fields.MACfiltersonlyallowyoutofilteroneMACaddressata
time. If you are adding a new filter, simply fill in the address fields
andclickOK.Ifyouareeditinganexistingfilter,replacetheold
address with the correct address and click OK.
4.Selecttheinclude or exclude option underneath the filter list. This
will determine if all filters in the list are excluded from accessing
theKVM,orifonlythoseaddressesinthelistareincluded among
thosethatcanaccesstheKVM.
Security – Default Webpage Name
The Default Webpage Name (also called a Login String) allows
administrators to specify a login string that must be included after the
IPaddresswhenaccessingtheKVMviawebbrowser.Forexample,a
default webpage name of abcdefg foraKVMwithanIPaddressof
192.168.0.126wouldrequirethefollowingURLtobeenteredwhen
accessingtheKVMviawebbrowser:192.168.0.126/abcdefg
 previous next