Filter
Top Products
2-4
The groups in the keypad Setup Menu contain the following setup parameters:
Setup Group Parameter Setup Group Parameter
RF Setup
Device IP
Date/Time
Set Time
0 Server IP 3 Set Date
Subnet Mask
Date Format
Starting Channel
Display of Year
SSID
WEP Encryption Key
Battery
Recharging or Not
4
Authentication (only if
WEP is set)
Skip Opening Screen
Speaker
Speaker Volume
Bar Codes
Code 3 of 9 5 Headphone Volume
1 UPC/EAN
Beep Tone
Code 2 of 5/I 2 of 5
2 of 5 Length
Other
Shut Down Time
Code 128 6 Voice Messages
Codabar Laser Options
MSI/ Plessey
Aiming Dot Duration
Code 11 Automatic Check Back
Code 93 Control Keys Only
RSS-14 LCD Display Mode
LCD Backlight
RS232
Baud Rate LCD Backlight Duration
2 Parity
Data Bits
Stop Bits
Once you have selected a group to edit, you will see each parameter
displayed in the order listed above. Use the next section of this chapter as a
reference for all RF Terminal Setup Parameters, whether they are
configured using the keypad or the bar coded Setup Menu. Each parameter
is followed by either a key symbol:
and the group you will find the parameter in,
or a bar code symbol:
or both, depending on how the parameter can be configured.
R
F
Setup