Filter
Top Products
6-10
InputScanner
Parameters: line, position, prompt, allowbreakout, timestamped
Function: This instructs the ActiveTerminal to display the
prompt at line and position and wait for data to be
entered from the terminal scanner only. Setting
allowbreakout to true allow user to "breakout" of
scanner only mode by pressing the end key on the
terminal. A termID+CR will be sent to the host.
InputYesNo
Parameters: line, position, prompt
Function: This instructs the ActiveTerminal to display the
prompt at line and position and wait for a Yes
(Enter key or C key) or a No (0 key or B key) from
the terminal keypad.
Note: C and B keys are used to facilitate keypad
entry while scanning with the integrated laser.
InputPassword
Parameters: line, position, prompt, shifted
Function: This instructs the ActiveTerminal to display the
prompt at line and position and wait for data to be
entered from the terminal keypad only. The entered
data is not displayed on the terminal.
InputSerial
Parameters: line, position, prompt
Function: This instructs the ActiveTerminal to display the
prompt at line and position and wait for data to be
received through the terminal serial port. Waiting for
serial input can be bypassed by pressing the enter key
on the terminal which will send an empty data string
to the host (fires the OnTermData event handler).
InputMagStripe
Parameters: data
Function: This command is for a printer initialization and
magstripe input on the Zebra Cameo printer
equipped with the magstripe option.
This instructs the ActiveTerminal to send the string
data to an attached Cameo printer with the
magstripe option and wait for data to be received
through the terminal serial port. Waiting for serial