Filter
Top Products
2-15
with the RF Terminal, this will be set to Rechargeable before shipping.
• If you didn't order re-chargeable batteries, this shipped setting is
Alkaline. Battery Status can be displayed by pressing the STATUS key
on the RF Terminal keypad.
• Before you can recharge the batteries, this parameter must be set to
Rechargeables. Don't try to recharge alkaline batteries. They might
explode. This will void your warranty.
• If you decide to use rechargeables after ordering the RF Terminal without
rechargeables included, you must change this setting allow recharging.
Date Format
US Format 0
European Format 1
• The US format of mm/dd/yy is the default setting.
• If you switch formats, you must reset the date (SET DATE) in the new
format also.
Set Date
For correct date display, the 6-digit date must be set in the date format you
plan to use. By default the US terminals use the US date format of
dd/mm/yy. If you change the date format, you must re-set the date to match
the new format. For example, to set a date of January 20, 1999, you would
enter 012099 (US format) or 200199 (European format). The date can be
scanned in from the bar coded Setup Menu or entered from the RF Terminal
keypad. To display the date during operation, press the STATUS key.
Set Time
The time is set using a 4-digit military hhmm format. For example, to set
the time to 3:08 p.m., you would enter 1508. The time can be scanned in
from the bar coded Setup Menu or entered from the RF Terminal keypad.
To display the time during operation, press the STATUS key.
Display of Year
2 digit 0
4 digit 1
• By default, the RF Terminal is configured to display and transmit the
year in a 2-digit format; i.e. 2005 would transmit and display as 05.
• Before you change the RF Terminal to display a 4-digit year, i.e. 2005,
make sure that the software receiving data from the RF Terminal is set
up to accept a 4-digit year.
D
ate/
Time
D
ate/
Time
D
ate
/
Time
D
ate
/
Time