Filter
Top Products
1-2
Terminal shuts down, simply press the ON/OFF button to resume operation.
The keypad is custom designed for the R/F Terminal operations. It has
numeric and control keys in the non-shifted state, and alpha characters in its
shifted state. You can readily determine if SHIFT is on by the cursor on the
display. When upper case alpha SHIFT is on, the cursor is a large black
rectangle. When SHIFT is off, the cursor is a narrow underline character.
For all prompts which ask for a YES or NO response, the ENTER key, is
the YES reply, and the 0 (zero) key is the NO reply. As you key data, you
will see each character displayed on the screen. If you make a mistake, you
can delete the last character by pressing the DELETE key, or you can clear
all characters displayed on the screen by pressing the CLEAR key.
You can order NiMH rechargeable batteries (L01) from Worth Data along
with a 9v recharging Power Supply that recharges the batteries completely
within 2 hours. When recharging options (batteries or Power Supply) are
ordered with the Terminals, the Terminal's Batteries Setup parameter is set
for recharging "1" which allows the batteries to be recharged under program
control. Otherwise, the batteries shipped are non-rechargeable alkalines
with no recharging options set in the Terminal. However, you may change
the battery type yourself. Using NIMH or alkaline batteries, you should get
24 hours of operation (assuming 1 transaction every 8 seconds).
If you did not order the rechargeable batteries and you change to
rechargeables, you must change the Terminal's Setup to Batteries 1 to allow
recharging. If you want to charge the batteries without having to remove
them from the Terminal, you must use the Worth Data 9v power supply.
You can safely use alkaline batteries in a terminal set for recharging,
providing you don’t plug a power supply into the terminal. Recharging
Alkaline batteries may cause the batteries to explode and leak battery acid
throughout the RF Terminal. Battery acid damage is not covered by the
Worth Data warranty because it not deemed to be “normal use”.
If you are using alkaline batteries (either regular or rechargeables) and
have selected the Rechargeables setting in the Battery setup parameter (See
Chapter 2; RF System Setup), the RF Terminal will generate the following
error message:
Alkaline Batteries
Detected,
Recharge-
ables Are Specified
Do Not Recharge