Filter
Top Products
A-1
Appendix A
Printer Pin-outs
These are the pin-outs for the cable needed to connect the Zebra Cameo
or QL 3 Printer to a Worth Data R/F Terminal. You can order our C12
cable for $25, or if you already have a cable from Zebra and feel
confident in your cable-making abilities, you can simply clip off the
connector end that should connect to the RF Terminal (not the 8 pin din
end) and replace the clipped-off connector with an RJ45 connector
according to the pin-outs on the next page:
Function Printer 8 pin RF Terminal RJ45 Function
Receive 1 2 Transmit
Transmit 2 3 Receive
CTS 3 not connected none
RTS 4 7 CTS
Ground 5 4 Ground
DSR 7 8 DTR
DTR 8 not connected none
Zebra Cameo/ QL 3 - to - RF Terminal Pin-outs
Laser and CCD
The laser and CCD TTL pin-outs are:
Pin Function
1 5 volts
2 Data
3 Phase
4 LED
5 Trigger
6 Enable
7 Shield(drain)
8 Ground
Laser and CCD Pin-outs
Remember:
If you make your own cables, you are on your own. We accept NO
RESPONSIBILITY for damages resulting from incorrect wiring.
Cameo
Connector
RJ45
connector for
RF Terminal