Filter
Top Products
2-10
characters can be useful if you need to differentiate between data that
comes from a bar code versus data coming from the keypad.
• Enabling use of the Mod 43 check character requires that the last
character of your bar code conform to the Mod 43 check character
specifications. See Appendix E; Code 39 for more information. Enable
transmission (A) will send the check digit data along with the rest of the
bar code data to your computer. To use A, you must also be using 8.
• Caps Lock ON causes lower case letters read as data to be transmitted
to the computer as UPPER CASE, and upper case letters to be
transmitted as LOWER CASE. Numbers, punctuation and control
characters are not affected. Caps Lock OFF means that letters will be
transmitted exactly as read. This setting applies to all bar code types.
• See Appendix E; Code 39 for more information regarding Accumulate
Mode.
UPC/EAN
Enable UPC/EAN 0
Disable UPC/EAN 1
Enable UPC/EAN Supplements 2
Disable UPC/EAN Supplements 3
Enable transmission of UPC-A NSC or EAN 13 1st 2
digits
4
Disable transmission of UPC-A NSC or EAN-13 1st 2 digits 5
Enable transmission of UPC-A and EAN-13 check digit 6
Disable transmission of UPC-A and EAN-13 check digit 7
Enable transmission of UPC-E NSC and EAN-8 1st digit 8
Disable transmission of UPC-E and EAN-8 1st digit 9
Enable transmission of UPC-E and EAN-8 Check digit A
Disable transmission of UPC-E and EAN-8 check digit B
UPC-E0 Compressed C
UPC-E0 Expanded D
EAN-8 observing 9&A E
EAN-8 forced to transmit 8 digits always F
• Use setting 2 to enable reading of the 2 and 5 digit UPC/EAN supplements
commonly found on magazines and paperback books as well as the
Extended Coupon Codes. Using this setting force left to right reading of
UPC codes to assure that the supplement code is not missed.
• ISBN (International Standard Book Numbering) bar codes are EAN-13
with a 5-digit supplement. If the “Bookland” bar code uses 978 (books) or
977 (periodicals) as the first three digits, then the RF Terminal can transmit
it in the ISBN format. The settings for this are found under the Laser
Options parameter. To enable transmission of the ISBN (prior to January
B
ar
Codes