Image considerations
Whether your original image is a transparency, photographic print or digital file, the
image characteristics you start with will have a major impact on the end results. As with
any other high quality print medium, the lower the quality of your source image, the
poorer the quality of your reproduction. There is simply no substitute for quality images.
Most common layout programs (QuarkXPress, InDesign, PageMaker) can be used to
supply artwork for the DocuColor 2045 and 2060. They will work with all popular,
standard image file formats, such as EPS, TIFF, JPEG, BMP, etc. You can use CMYK or
RGB files – the colour management software in the Creo and Fiery RIPs will convert RGB
images into the CMYK mix required for the press.
In terms of image resolution, the same 300 dpi images used for offset are equally suitable
for printing on the DocuColor 2045 and 2060. As with any offset print run, images of
lower resolution can be used, with a compromise in ultimate image quality. On the other
hand, images with resolution greater than 600 dpi (the print resolution of the DocuColor
2000 series) will only waste processing time and will not give you better results.
The images on the opposite page will allow you to make your own judgement on image
quality, with images ranging from 300 dpi down to 72 dpi. If high image quality is not
your prime requirement, then using lower image resolutions will result in faster
processing time.
1 – 2
DocuColor 2000 series design guide