Filter
Top Products
binding and finishing
6 - 9
Double-sided printing
The DocuColor 2060 is capable of automatically duplex printing on up to 220 gsm
media. During automatic duplex printing mode the machine will make printing process
control changes during the side 2 pass, in an attempt to closely match the image on
side 1. These make printing process control changes are necessary because the paper
will be drier and hotter than it was during the first pass and therefore have different
electrostatic properties. Some gloss differential may still be visible, especially when
using heavy weight coated stocks
Use standard sizes: Design your printed pieces to take maximum advantage of common
sheet sizes. For example, think A4 or A3.
Use paper specifically designed for the equipment you’re using: For example, paper
designed specifically to optimise the performance of digital printing equipment may
significantly reduce waste due to jamming and offer a better surface for dry ink
adhesion.
Reduce basis weight: Heavier basis weight sheets cost more per sheet than lighter ones.
Lighter weight stocks will also reduce mailing costs.
Select the right paper for the job: Choosing the right paper is key. Consider factors such
as image quality, brightness, equipment choice, and end use (is folding required?). Then
select a paper that will ensure the best results.