Xerox 3460 Scanner User Manual


 
Xerox DocuMate 3460
User’s Guide
88
FTP Transfer
The FTP Transfer destination link allows scans to be sent directly to an FTP server from One Touch.
Please contact your server administrator for the server information you need to configure this link.
Alternatively, have your site administrator or IT professional configure this link for you. Setup and
configuration of the FTP server and user accounts are outside the scope of this document.
Supported file types—All image and text file formats, except HTML, are available when scanning to
an FTP server. Note that text file formats are only available if an OCR module or application is installed.
Please refer to Tex t For mats on page 68 to see a list of text file formats that are available when OCR is
installed.
Destination type—The FTP Transfer destination is classified as a “Storage Link”. To make it available
in the destination list, you must select Storage and CD-R/W on the Options tab in the One Touch
Properties window.
All configuration of the FTP server is done using the FTP Settings tab in the Scan Configuration
Properties window.
1. Select FTP Transfer as the destination application.
2. Open the Scan Configuration you want to modify for scanning to an FTP server, or create a new
Scan Configuration.
Select an existing configuration in which you have already specified your FTP server information,
and then click on the Copy button to create a new configuration using the settings of the current
configuration.
3. Click on the FTP Settings tab and fill in the fields with the information for you FTP server.
Protocol—Select which protocol you want to use to transfer the scan to the server.
Host—Input the internet or intranet path of the server where you want to send the scanned
documents. you do not need ftp:// at the beginning. For example, ftp.company.com