Filter
Top Products
FreeFlow Scanner 665E Operator Manual
3-26
3. Scan and Print
• Job type: Select the desired job type from the drop-down
list. The various job types are discussed in more detail in
Chapter 5 on page 5-1.
• Stock size: Select the desired output size from the drop-
down list. The various stock sizes are discussed in more detail
in Chapter 5 on page 5-1.
NOTE: The remainder of these features are not available when
Save: Save As: PDF is selected.
• Stock type: Select the desired output stock type from the
drop-down list. The various stock types are discussed in more
detail in Chapter 5 on page 5-1.
The Drilled option is activated only if that paper stock is
loaded in one of the paper trays; otherwise, this option is
grayed out and unavailable for selection.
• Sides imaged: From the drop-down list, select 1 Sided, 2
Sided, or (2 Sided) Head to Toe.
• Output: From the drop-down list, select the location where
the printed output is sent. The available selections will vary
depending on the finishing devices connected to your system.
• Finishing: Depending on the selected output device, there
may be finishing options available, such as stapling. The
selection made here depends on the selection made for
Output.
• More Options: Click this button to open the Job Setup dialog
box. This dialog box and its options are discussed in more
detail in Chapter 5 on page 5-1.