Filter
Top Products
Chapter 2: Installing the AP+2 as an Ethernet Client 13
2
Installing the AP+2 as an
Ethernet Client
The AP+2 can be connected to a gaming device (for example,
an Xbox or Playstation) or computer so that device can have
wireless access to a wireless network. This chapter explains
how to do this.
Tip!
Sony PlayStation
®
devices do not have an Ethernet port. To wirelessly
enable a Sony PlayStation using the AP+2, you must purchase an Ethernet adapter
from Sony. The AP+2 can plug into this adapter.
1
11
1 Access the AP+2’s
Web Management Interface
by logging
into the device, as explained below.
a
aa
a
Directly connect the AP+2 to an Ethernet-equipped
computer that has a Web browser. To do this, plug one
end of the included Ethernet cable into the
RJ-45
port on
the back of the AP+2 and plug the other end into the
Ethernet port on the computer.
b
bb
b
Plug the included power cube into a power strip or wall
outlet and then plug its other end into the
Power
jack on
the back of the AP+2.
Important!
Only use the power cube shipped with the AP+2. Other
power cubes may damage the device.