Filter
Top Products
Chapter 5: Advanced Options 31
5
Advanced Options
Once your AP+2 is installed and running, you may want to
specify some advanced settings for the device. These advanced
options are not required and many users may not need or want
to use them. However, for those advanced users that do, this
chapter provides details about these options and how to apply
them to your wireless network.
To specify advanced options, you must log into the AP+2’s
Web
Management Interface
, as explained below.
1
11
1 Directly connect the AP+2 to an Ethernet-equipped computer
that has a Web browser. To do this, plug one end of the
included Ethernet cable into the
RJ-45
port on the back of the
AP+2 and plug the other end into the Ethernet port on the
computer. (If your AP+2 is already connected to another
device, such as a router or gaming device, do not worry; simply
plug it back in after you have used an Ethernet-equipped
computer to specify the settings you need.)
2
22
2 Plug the included power cube into a power strip or wall outlet
and then plug its other end into the
Power
jack on the back of
the AP+2.
Important!
Only use the power cube shipped with the AP+2. Other
power cubes may damage the device.