Filter
Top Products
32 Zoom AP+2 User’s Guide
3
33
3 Change the TCP/IP Settings on your computer so that it uses
static IP addressing and the IP address and subnet mask below.
Be sure to make note of what the settings are prior to changing
them, since you will need to restore these settings later.
IP Address:
10.0.0.100
Subnet Mask:
255.255.255.0
Tip!
If you do not know how to access and specify TCP/IP settings on your
computer, see
Appendix B: Specifying TCP/IP Settings
on page 55.
4
44
4 Open a Web browser, type
10.0.0.200
in the address bar, then
press
Enter
. (This is the IP address of the AP+2.)
5
55
5 When the
Login Screen
opens, do not enter a password. Click
the
Login
button to access the
Web Management Interface
for the AP+2.
One you are logged in, a navigational menu appears on the left side
of the
Web Management Interface
. If you click an item in the
menu, a list of pages on which settings can be specified appears.