Filter
Top Products
40 Zoom AP+2 User’s Guide
!
Obtain an IP Address Automatically [DHCP].
Select
this option button if you have a DHCP server on the
network and want to use dynamic addressing to acquire an
IP address for accessing the
Web Management
Interface
. The AP+2 will automatically be assigned a new
IP address when booted. The AP+2 will also assign an IP
address to any wireless device that requests one. If you
select this option, you do not have to specify any other
information on this page; click the
Save Changes
button.
3
33
3
If you selected
Configure a Static IP Address
, the additional
fields appear so you can specify more information. Specify the
following:
a
aa
a
Specify the IP address for the
Web Management
Interface
of the AP+2 by entering it in the boxes
provided. By default, the unit’s IP address is 10.0.0.200.
b
bb
b
Specify the subnet mask for the unit by entering it in the
boxes provided. By default, it is 255.255.255.0.
c
cc
c
Select or clear the
The Access Point acts as a DHCP
Server
check box, depending on your needs. If you select
this option, the AP+2 will provide DHCP information to
any devices requesting it. When filling in the settings that
appear when this option is selected, ensure that the range
of IP addresses is in the same subnet as the IP address of
the AP+2. If you are plugging the AP+2 into a router, you
should allow the DHCP server in that router assign the IP
addresses to the wireless devices on your network.
d
dd
d
Click the
Save Changes
button.