Filter
Top Products
Appendix B: Specifying TCP/IP Settings 55
Appendix B
Specifying TCP/IP Settings
Accessing the AP+2’s
Web Management Interface
requires that
you plug the unit directly into the Ethernet port of a computer. It
also requires that the computer’s TCP/IP settings be set for static
IP addressing and the following IP address and subnet mask:
IP Address:
10.0.0.100
Subnet Mask:
255.255.255.0
This Appendix details how to access and set the TCP/IP settings
for Windows, Macintosh, and Linux operating systems. Depending
on your operating system, follow the steps in the appropriate
section to ensure your TCP/IP settings are correct.
• If you are using Windows, see
Windows TCP/IP Settings
on
page 56.
• If you are using Macintosh, see
Macintosh TCP/IP Setting
on page 59.
• If you are using Linux, see
Linux
TCP/IP Settings
on
page 61.