Filter
Top Products
Prestige 128MH PSTN Router/Hub
9-13
Chapter 9 Filter Configuration
Table 9-7. IPX Filter Rule Menu Fields
Field Description
IPX Packet Type Enter the IPX packet type value of the packet you wish to filter. This
value should be two hex-bytes.
Destination/Source Network # Enter the four hex-byte destination/source network numbers of the
packet that you wish to filter.
Destination/Source Node # Enter in the six hex-byte value for the destination/source node
number of the packet you wish to filter.
Destination/Source Socket # Enter the destination/source socket number of the packets that you
wish to filter. This should be a 4-byte hex value.
Destination/Source Socket #
Comp
You can select what comparison quantifier you wish to use to
compare to the value given in Destination Socket # and Source
Socket #.
Operation This field is only active if one of the Socket # fields is 0452 or 0453
indicating SAP and RIP packets. There are seven options for this
field which determines the operation for the IPX packet.
l None.
l RIP Request.
l RIP Response.
l SAP Request.
l SAP Response.
l SAP Get Nearest Server Request.
l SAP Get Nearest Server Response
Once you have completed filling in Menu 21.1.3 - IPX Filter Rule, press [Enter] at the message [Press
Enter to Confirm] to save your selections, or press [Esc] to cancel. This data will now be displayed on
Menu 21.1 - Filter Rules Summary.