Filter
Top Products
Prestige 128MH PSTN Router/Hub
3-10
Chapter 3 Internet Access Application
Table 3-7 contain instructions on how to configure your Prestige for Internet Access.
Table 3-7. Internet Access Setup Menu Fields
Field Description Observation
ISP's Name Enter the name of your Internet Service Provider. (This information
is for identification purposes only.)
Myisp
ISP IP Addr Enter the IP Address of the remote gateway at the ISP's site. If you
do not have this data, just leave it blank.
(optional)
Connection Type Select [Switch] if a Dail-up modem is used to connect to your ISP.
Select [Leased] if a Leased Line Modem is used to connect to your
ISP.
Space-bar to
toggle
[Switch/Leased]
Leased Ports
If [Leased] is selected in Connection Type
, this field displays the
WAN port that supports Leased Line connections.
This field is read only (r.o.), since only the serial port WAN port 1
supports, enter the WAN Port numbers in the Leased Line
connection.
Note: The Connection Type of WAN Port 1 also must be
specified as [Leased] in Menu 2.1 - Async WAN Port Setup.
[1 (r.o.)]
Pri(mary) Phone #
The first number your Prestige will dial to connect to the ISP. Once
connected, your Prestige will use the BACP (Bandwidth Allocation
Control Protocol) to establish the second B-channel if PPP/MP is
enabled, and the ISP also supports MP and BACP.
(required)
Sec(ondary) Phone
#
If the Primary Phone number is busy or does not answer, your
Prestige will call the Secondary Phone number if available.
(optional)
My Login Name Enter the login name assigned to you by your ISP. (required)
My Password Enter the password associated with the login name above. Note
that this login name/password pair is only for your Prestige to
connect to the ISP's gateway. When you use TCP/IP applications
(for example, FTP) to access the Internet from your workstation,
you will need a separate login name and password for each server.
(required)