Prestige 128MH PSTN Router/Hub
5-4
Chapter 5 Remote Node Configuration for LAN-to-LAN
Table 5-1. Remote Node Profile Menu Fields for Dial-up Line Applications (continued)
Field Description Options
Incoming: Rem Node
Login Name
Enter the login name that this Remote Node will use when
it calls into your Prestige.
The login name in this field combined with the Rem Node
Password will be used to authenticate the incoming calls
from this node.
Incoming: Rem Node
Password
Enter the password used when this Remote Node calls
into your Prestige.
Incoming: Rem CLID This field is active only if [Call Direction] is either [Both] or
[Incoming]. Otherwise, an [N/A] appears in the field.
This is the Calling Line ID (the telephone number of the
calling party) of this Remote Node.
If you enable the CLID Authen field in Menu 13 - Default
Dial In, your Prestige will check this number against the
CLID in the incoming call. If they do not match and the
CLID Authen is Required, the call will be rejected.
[Both]
[Incoming]
[N/A]
Incoming: Call Back This field will be valid only if [Call Direction] is [Both].
Otherwise, an [N/A] appears in the field.
This field determines whether or not your Prestige will call
back after receiving a call from this Remote Node.
If this option is enabled, your Prestige will disconnect the
initial call from this node and call it back at the Outgoing
Primary Phone Number (see below).
[Enable]
[Disable]
Outgoing: My Login
Name
This is a required field [?] if [Call Direction] is either [Both]
or [Outgoing]. Enter the login name for your Prestige when
it calls this Remote Node.