Filter
Top Products
Prestige 128MH PSTN Router/Hub
2-17
Chapter 2 Hardware Installation & Initial Setup
Table 2-5. Async WAN Port Setup Menu Fields (continued)
Connection
Type
For WAN Port 2 and 3 (LINE 1 and LINE 2 ports with internal 56K
modems), this field is read only (r.o.). The connection type is set to
[Switch] for Dial-up line applications only.
[Switch (r.o.)]
Phone
Number
Enter the telephone number assigned to your modem line by your
telephone company. Note that your Prestige only accepts digits; do not
include dashes and spaces in this field.
5551212
(example)
Device Type For WAN Port 1 (Serial WAN port connected to external modem or
ISDN TA), use the space bar to select one of the following devices:
[Modem / ISDN TA / X.25 PAD / 56K Modem]. A Device Type is selected
for the WAN Port such that a Remote Node only picks up a free device of
the selected type to dial out. Only the WAN Ports of the same device
type can be bundled. This field is not applicable if the Connection Type is
set to [Leased].
Space-bar to
toggle
[Modem]
[ISDN TA]
[X.25 PAD]
[56K Modem]
Device Type For WAN Port 2 and 3 (LINE 1 and LINE 2 ports with internal 56K
modems), this field is read only (r.o.). The device type is set to [56K
Modem] which corresponds to the 56K modems built in your Prestige
128MH.
[56K Modem
(r.o.)]
Port Speed Use the space bar to select the maximum speed of your Modem or ISDN
TA. Available speeds are:
9600 / 19200 / 38400 / 57600 / 115200 / 230000 bps
Note that the port speed is set to 56Kps for WAN port 2 and 3 with
internal modems.
115200
(default)
AT Command
String: Init
Enter an AT command string to initialize the modem or ISDN TA attached
to the WAN Port. When the Connection Type is set to [Switch], you must
enter an AT command (ats0=0) to disable auto answer (i.e. ats0=0) or
your Prestige will answer the incoming phone call.
Note the default AT command string [at&s95=1] for dial-up
applications with internal 56K modem.
(Default: ats0=0)
Advanced
Setup
To edit the Advanced Setup for this Modem/ISDN TA, move the cursor to
this field, use the space bar to select [Yes] and press [Enter]. This will
bring you to Menu 2.1.1 - Advanced Setup.
[Yes/No]
When you complete this menu, press [Enter] to save your selections, or [Esc] to cancel. After you press
[Enter], the Prestige uses the information you have saved to initialize the WAN Port and the connected
Modem/ISDN TA.