Filter
Top Products
Prestige 128MH PSTN Router/Hub
5-3
Chapter 5 Remote Node Configuration for LAN-to-LAN
Table 5-1 contains the instructions on how to configure the Remote Node Menu for Dial-up Line
applications.
Table 5-1. Remote Node Profile Menu Fields for Dial-up Line Applications
Field Description Options
Rem Node Name This is a required field [?]. Enter a descriptive name for the
Remote Node, for example, SJHQ.
This field can support up to eight characters. This name
must be unique from any other Remote Node name or
Remote Dial-in User name.
Active Press the space bar to toggle between [Yes] and [No].
When a Remote Node is deactivated, it has no effect on
the operation of your Prestige, even though it is still kept in
the database, and can be activated in the future.
Deactivated nodes are displayed with a minus sign (-) at
the beginning of the name in Menu 11.
Press space
bar to toggle
[Yes/No]
Connection Type Use the space bar to toggle between [Switch] and
[Leased]. After [Leased] is selected, moving the cursor to
the next field will bring you to Submenu 11.1.2 for a
Leased Line Modem application.
Press space
bar to toggle
[Switch/Leased]
l If this parameter is set to [Both], your Prestige can
both place and receive calls to/from a Remote Node.
[Both]
l If set to Incoming, your Prestige will not place a call
to a Remote Node.
[Incoming]
l If set to Outgoing, your Prestige will drop any call
from a Remote Node.
[Outgoing]
Call Direction
Several other fields in this menu depend on this
parameter. For example, in order to enable [Call Back], the
Call Direction must be [Both].