Filter
Top Products
Prestige 128MH PSTN Router/Hub
3-16
Chapter 3 Internet Access Application
Step 3. In Menu 11.1, choose a name for your backup ISP account, then set the Active field to
[No], and enter your outgoing login name, password, and phone number(s). The
Remote IP Address field should be set to [1.1.1.1].
Step 4. In Menu 11.3, set the remote node's subnet mask to [0.0.0.0], and set RIP to [None].
Step 5. Save the new configuration.
3.6.2 To Switch ISP
Once you have done this, if you need to switch from your primary ISP to a backup ISP follow
these steps:
Step 1. Enter Menu 11 and select your Primary ISP.
Step 2. In Menu 11.1, set the Active field to [No].
Step 3. Enter Menu 11 again and select your Backup ISP.
Step 4. In Menu 11.1, set the Active field to [Yes].
You will now be able to access the Internet through the backup ISP Remote Node.