Filter
Top Products
Prestige 128MH PSTN Router/Hub
5-19
Chapter 5 Remote Node Configuration for LAN-to-LAN
5.2.2 Editing Leased Line PPP Options
To edit the remote node PPP Options in the case of a Leased Line connection, move the cursor to
the [Edit PPP Options] field in Menu 11.2 - Remote Node Profile, and use the space bar to
toggle and select [Yes], then press [Enter]. Menu 11.2 appears as shown in Figure 5-5.
Figure 5-5. Menu 11.2 - Remote Node PPP Options for Leased Line Applications
Table 5-4 describes the Remote Node PPP Options Menu for Leased Line applications, and
contains instructions on how to configure the PPP options fields.
Table 5-4. Remote Node PPP Options Menu Fields for Leased Line Applications
Field Description Option
Select CCP (Compression Control Protocol) for the
PPP or MP link. There are two options in this field.
l Standard PPP - Standard PPP options will be
used.
[Standard PPP]
Encapsulation
l CISCO PPP - Cisco PPP options will be used. [CISCO PPP]
Compression Turn on the Stac Compression. The default for this
field is Off.
[On/Off]
(Default = Off)
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Press ENTER to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.