Filter
Top Products
Prestige 128MH PSTN Router/Hub
13-14
Chapter 13 System Maintenance
13.7.2 Load ROM File
Type [atur3] and wait until your Prestige responds with an [OK] to begin uploading the new
ROM File, as shown in Figure 13-12. ROM File includes Prestige configuration, system-related
data, error and trace log. After uploading the new ROM File, you will lose all data. You need to
set the SMT baud rate to the default: 9600. You also need to reconfigure your Prestige.
Figure 13-12. Menu 24.7.2 - System Maintenance - Upload ROM File
13.7.3 Load Modem Firmware
Figure 13-13. Menu 24.7.3 - System Maintenance - Upload WAN Port 2 Modem Firmware
Menu 24.7.2 -- System Maintenance - Upload ROM File
To load the ROM file, type "atur3" while in debug mode and wait for
"Starting XMODEM upload" before beginning to upload file. Type
"atgo" after file has successfully loaded to start RAS. Then change
the baud rate to 9600.
Proceeding with the upload will erase the current ROM file.
Do You Which To Proceed:(Y/N)
Menu 24.7.3 -- System Maintenance - Upload WAN Port 2 Modem Firmware
Proceeding with the upload will erase the current modem code.
Do You Which To Proceed:(Y/N)