Filter
Top Products
Prestige 128MH PSTN Router/Hub
5-9
Chapter 5 Remote Node Configuration for LAN-to-LAN
only use outgoing traffic to make this determination, and Receive will only use incoming traffic to
make this determination.
If, after making the call to bring up a second port, the second port does not succeed in joining the
Multilink Protocol bundle (because the remote device does not recognize the second call as
coming from the same device), your Prestige will hang up the second port and continue with the
first port alone.
Similarly, a third port will be brought up or dropped based on the target utility for the third port.
The target utility for the third port is based on the Target Utility for the second port and
Bandwidth Increment for Additional Ports. For example, when Bandwidth Increment for an
Additional Port is 5 (Kbps) and the Target Utility for a second Port is 10-20; then the Target
Utility for a third port is 15-25.
See Menu 11.2 - Remote Node PPP Options in Figure 5-3 for a detailed description of BOD fields
and instructions on how to configure the PPP Options.
5.1.3 Editing PPP Options
To edit the remote node PPP Options, move the cursor to the [Edit PPP Options] field in Menu
11.1 - Remote Node Profile, and use the space bar to toggle and select [Yes], then press [Enter].
Menu 11.2 appears as shown in Figure 5-3.
Figure 5-3. Menu 11.2 - Remote Node PPP Options
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Multiple Link Options:
BOD Calculation= Transmit or Receive
Min. Ports= 1
Max. Ports= 1
Target Utility for 2nd Port(Kbps) 32-48
Bandwidth increment for Additional Ports(Kbps)= 0
Add Persist(sec)= 5
Subtract Persist(sec)= 5
Press ENTER to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.