Filter
Top Products
Prestige 202H User’s Guide
15-12 Creating Custom Rules
Figure 15-5 Adding/Editing Source and Destination Addresses
The following table describes the fields in this screen.
Table 15-4 Adding/Editing Source and Destination Addresses
FIELD DESCRIPTION EXAMPLE
Address Type
Do you want your rule to apply to packets with a particular
(single) IP address, a range of IP addresses (e.g.,
192.168.1.10 to 192.169.1.50), a subnet or any IP
address? Select an option from the drop down list box
Subnet Address
Start IP Address Enter the single IP address or the starting IP address in a range
here.
End IP Address Enter the ending IP address in a range here.
Subnet Mask Enter the subnet mask here, if applicable.
Click Apply to save your customized settings and exit this screen. Click Cancel to return to the previous
configuration. Use the Help icon to view field descriptions.
15.6 Timeout
The fields in the Timeout screens are the same for Local and Internet networks, so
the discussion below refers to both.