ZyXEL Communications 202H Network Card User Manual


 
Prestige 202H User’s Guide
VPN/IPSec Setup 26-7
Table 26-2 Menu 27.1 IPSec Summary
FIELD DESCRIPTION EXAMPLE
Remote Addr
Start
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured
to Single, this is a (static) IP address on the network behind the
remote IPSec router.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured
to Range, this is the beginning (static) IP address, in a range of
computers on the network behind the remote IPSec router.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured
to SUBNET, this is a (static) IP address on the network behind the
remote IPSec router.
This field displays N/A when you configure the Secure Gateway
Addr field in SMT 27.1.1 to 0.0.0.0.
172.16.2.40
Remote Addr End
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured
to Single, this is the same (static) IP address as in the Remote Addr
Start field.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured
to Range, this is the end (static) IP address, in a range of computers
on the network behind the remote IPSec router.
When the Addr Type field in Menu 27.1.1 IPSec Setup is configured
to SUBNET, this is a subnet mask on the network behind the remote
IPSec router.
This field displays N/A when you configure the Secure Gateway
Addr field in SMT 27.1.1 to 0.0.0.0.
172.16.2.46
Secure GW Addr This is the WAN IP address or the domain name (up to the first 15
characters are displayed) of the IPSec router with which you are
making the VPN connection. This field displays 0.0.0.0 when you
configure the Secure Gateway Addr field in SMT 27.1.1 to 0.0.0.0.
193.81.13.2
Select Command
Press [SPACE BAR] to choose from None, Edit or Delete and then
press [ENTER]. You must select a rule in the next field when you
choose the Edit, Delete or Go To commands.
Select None and then press [ENTER] to go to the “Press ENTER to
Confirm…” prompt.
Use Edit to create or edit a rule. Use Delete to remove a rule. To edit
or delete a rule, first make sure you are on the correct page. When a
VPN rule is deleted, subsequent rules do not
move up in the page
list.
None