Filter
Top Products
Prestige 202H User’s Guide
VPN/IPSec Setup 26-11
Figure 26-5 Menu 27.1.1 IPSec Setup
Table 26-7 Menu 27.1.1 IPSec Setup
FIELD DESCRIPTION EXAMPLE
Index This is the VPN rule index number you selected in the previous menu.
1
Name Enter a unique identification name for this VPN rule. The name may be up
to 32 characters long but only 10 characters will be displayed in Menu
27.1 - IPSec Summary.
Taiwan
Active
Press [SPACE BAR] to choose either Yes or No. Choose Yes and press
[ENTER] to activate the VPN tunnel. This field determines whether a VPN
rule is applied before a packet leaves the firewall.
Yes
Keep Alive
Press [SPACE BAR] to choose either Yes or No.
Select Yes to have the Prestige automatically re-initiate the SA after the
SA lifetime times out, even if there is no traffic. The remote IPSec router
must also have keep alive enabled in order for this feature to work.
No
Local ID Type
Press [SPACE BAR] to choose IP, DNS or E-MAIL. Select IP to identify
this Prestige by its IP address. Select DNS to identify this Prestige by a
domain name. Select E-mail to identify this Prestige by an e-mail address.
IP
Menu 27.1.1 - IPSec Setup
Index #= 1 Name= ?
Active= No Keep Alive= No
Local ID type= IP Content=
My IP Addr= 0.0.0.0
Peer ID type= IP Content=
Secure Gateway Addr= 0.0.0.0
Protocol= 0
Local: Addr Type= SINGLE
IP Addr Start= 0.0.0.0 End/Subnet Mask= N/A
Port Start= 0 End= N/A
Remote: Addr Type= N/A
IP Addr Start= N/A End/Subnet Mask= N/A
Port Start= N/A End= N/A
Enable Replay Detection= N/A
Key Management= N/A
Edit Key Management Setup= N/A
Press ENTER to Confirm or ESC to Cancel: