Filter
Top Products
Prestige 202H User’s Guide
Introducing the SMT 3-5
Menu 3
Ethernet Setup
Menu 4
Internet Access Setup
Menu 11
Remote Node Setup
Menu 12
Static Routing Setup
Menu 12.1
Edit IP Static Route
Menu 11.1
Remote Node Profile
Menu 3.1
LAN Port Filter Setup
Menu 11.3
Remote Node Network
Layer Options
Menu 3.2.1
IP Alias Setup
Menu 3.2
TCP/IP and DHCP
Setup
Prestige Main Menu
Menu 1
General Setup
Menu 11.6
Remote Node ATM
Layer Options
Menu 15
NAT Setup
Menu 15.1
Address Mapping Sets
Menu 15.2
NAT Server Sets
Menu 15.2.x
NAT Server Setup
Menu 15.1.x
Address Mapping Rules
Menu 15.1.x.x
Address Mapping Rule
Menu 24.7.1
System Maintenance --
Upload System Firmware
Menu 24.7.2
System Maintenance --
Upload System
Configuration File
Menu 22
SNMP Configuration
Menu 23
System Password
Menu 24
System Maintenance
Menu 27
VPN IPSec Setup
Menu 24.1
System Maintenance --
Status
Menu 24.3
System Maintenance --
Log and Trace
Menu 24.4
System Maintenance --
Diagnostic
Menu 24.5
System Maintenance --
Backup Configuration
Menu 24.6
System Maintenance --
Restore Configuration
Menu 24.7
System Maintenance --
Upload Firmware
Menu 24.8
Command Interpreter
Mode
Menu 24.3.1
System Maintenance --
View Error Log
Menu 24.3.2
System Maintenance --
UNIX Syslog
Menu 24..2.1
System Maintenance --
Information
Menu 24.2.2
System Maintenance --
Change Console Port
Speed
Menu 24.2
System Information and
Console Port Speed
Menu 24.9.2
Blacklist
Menu 26
Schedule Setup
Menu 26.x
Schedule Set Setup
Menu 24.9
Call Control
Menu 24.9.1
Call Control Parameters
Menu 24.9.3
Budget Management
Menu 11.5
Remote Node Filter
Menu 2
ISDN Setup
Menu 13
Default Dial-in Setup
Menu 14
Dial-in User Setup
Menu 2.1
ISDN Advanced Setup
Menu 11.2
Remote Node
PPP Options
Menu 13.1
Default Dial-in Filter
Menu 14.1
Edit Dial-in User
Menu 21.x
Filter Rules Summary
Menu 21.x.1
TCP/IP Filter Rule
Menu 21.x.1
Generic Filter Rule
Menu 23.1
Change Password
Menu 23.2
External Server
Menu 24.9.4
Call History
Menu 27.1
IPSec Summary
Menu 27.1.1
IPSec Setup
Menu 27.1.1.1
IKE Setup
Menu 27.2
SA Monitor
Menu 27.3
View IPSec Log
3.6 Changing the System Password
The first thing you should do is to change the system password by performing the following steps.
Step 1. Enter 23 in the Main Menu to open Menu 23 - System Security as shown below.