Filter
Top Products
Prestige 202H User’s Guide
System Information and Diagnosis 20-3
Table 20-1 Menu 24.1 System Maintenance Status
FIELD DESCRIPTION
Own CLID Shows your Caller ID.
Peer IP Address This refers to the IP address of the peer.
Peer CLID This shows the Caller ID of the peer.
Ethernet This shows statistics for the LAN.
Status This displays the port speed and duplex setting.
TxPkts This is the number of transmitted packets to the LAN.
RxPkts This is the number of received packets from the LAN.
Collision This is the number of collisions.
Total Outcall Time
This shows the total outgoing call time for both B1 and B2 channels since the
system has been powered up.
CPU Load This specifies the percentage of CPU utilization.
LAN Packet Which
Triggered Last Call
This shows the first 48 octets of the LAN packet that triggered the last outgoing
call.
Commands
Drop B1 This command drops the B1 channel.
Drop B2 This command drops the B2 channel.
Reset Counters This command resets all counters.
Drop All This command drops all channels.
20.3 System Information and Console Port Speed
This section describes your system and allows you to choose different console port speeds. To get to the
System Information and Console Port Speed:
Step 1. Enter 24 to go to Menu 24 – System Maintenance.
Step 2. Enter 2 to open Menu 24.2 – System Information and Console Port Speed.
Step 3. From this menu you have two choices as shown in the next figure: