Filter
Top Products
Prestige 202H User’s Guide
SMT Menus 24.8 to 24.10 22-7
Enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the time and date
settings of your Prestige as shown in the following screen.
Figure 22-9 Menu 24.10 System Maintenance: Time and Date Setting
The following table describes the fields in this screen.
Table 22-4 Time and Date Setting Fields
FIELD DESCRIPTION
Enter the time service protocol that your timeserver sends when you turn
on the Prestige. Not all timeservers support all protocols, so you may have
to check with your ISP/network administrator or use trial and error to find a
protocol that works. The main differences between them are the format.
Daytime (RFC 867) format is day/month/year/time zone of the server.
Time (RFC-868) format displays a 4-byte integer giving the total number of
seconds since 1970/1/1 at 0:0:0.
Use Time
Server when
Bootup
NTP (RFC-1305) the default, is similar to Time (RFC-868).
None enter the time manually.
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup= NTP (RFC-1305)
Time Server Address= tick.stdtime.gov.tw
Current Time: 00 : 00 : 00
New Time (hh:mm:ss): 11 : 23 : 16
Current Date: 2000 - 01 - 01
New Date (yyyy-mm-dd): 2001 - 03 - 01
Time Zone= GMT+0800
Press ENTER to Confirm or ESC to Cancel: