Filter
Top Products
Prestige 202H User’s Guide
System Information and Diagnosis 20-7
Figure 20-8 Menu 24.3.2 System Maintenance Unix Syslog
You need to configure the UNIX syslog parameters described in the following table to activate syslog then
choose what you want to log.
Table 20-3 Menu 24.3.2 System Maintenance Unix Syslog
FIELD DESCRIPTION
Syslog:
Active Press [SPACE BAR] and then [ENTER] to turn syslog on or off.
Syslog IP Address Enter the IP Address of the server that will log the CDR (Call Detail Record) and
system messages i.e., the syslog server.
Log Facility Press [SPACE BAR] and then [ENTER] to select a Local option. The log facility
allows you to log the message to different files in the server. Please refer to your
UNIX manual for more details.
Types:
CDR
Call Detail Record (CDR) logs all data phone line activity if set to Yes.
Packet Triggered The first 48 bytes or octets and protocol type of the triggering packet is sent to the
UNIX syslog server when this field is set to Yes.
Filter log
No filters are logged when this field is set to No. Filters with the individual filter Log
Filter field set to Yes are logged when this field is set to Yes.
PPP log
PPP events are logged when this field is set to Yes.
POTS log
Voice calls are logged when this field is set to Yes.
Menu 24.3.2 - System Maintenance - UNIX Syslog
Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Types:
CDR= No
Packet triggered= No
Filter log= No
PPP log= No
POTS log=No
Firewall log=No
Press ENTER to Confirm or ESC to Cancel: