Filter
Top Products
Prestige 202H User’s Guide
Call Scheduling 23-3
Table 23-1 Menu 26.1 Schedule Set Setup
FIELD DESCRIPTION OPTIONS
Weekday:
Day
If you selected Weekly in the How Often field above, then select the day(s)
when the set should activate (and recur) by going to that day(s) and
pressing [SPACE BAR] to select Yes, then press [ENTER].
Yes
No
N/A
Start Time Enter the start time when you wish the schedule set to take effect in hour-
minute format.
Duration Enter the maximum length of time this connection is allowed in hour-minute
format.
Action
Forced On means that the connection is maintained whether or not there is
a demand call on the line and will persist for the time period specified in the
Duration field.
Forced Down means that the connection is blocked whether or not there is
a demand call on the line.
Enable Dial-On-Demand means that this schedule permits a demand call
on the line.
Disable Dial-On-Demand means that this schedule prevents a demand call
on the line.
Forced On
Forced
Down
Enable Dial-
On-Demand
Disable
Dial-On-
Demand
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save
your configuration, or press [ESC] at any time to cancel.
If a connection has been already established, your Prestige will not drop it. Once the connection is dropped
manually or it times out, then that remote node can't be triggered up until the end of the Duration.
23.3 Applying Schedule Sets
Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11
from the Main Menu and then enter the target remote node index. You can apply up to four schedule sets,
separated by commas, for one remote node. Change the schedule set numbers to your preference(s).