Filter
Top Products
ZyWALL 2 and ZyWALL 2WE
SNMP Configuration 20-3
• GetNext - Allows the manager to retrieve the next object variable from a table or list within an agent.
In SNMPv1, when a manager wants to retrieve all elements of a table from an agent, it initiates a Get
operation, followed by a series of GetNext operations.
• Set - Allows the manager to set values for object variables within an agent.
• Trap - Used by the agent to inform the manager of some events.
20.2 Supported MIBs
The ZyWALL supports MIB II that is defined in RFC-1213 and RFC-1215. The focus of the MIBs is to let
administrators collect statistical data and monitor status and performance.
20.3 SNMP Configuration
To configure SNMP, enter 22 from the main menu to display Menu 22 - SNMP Configuration as shown
next. The “community” for Get, Set and Trap fields is SNMP terminology for password.
Figure 20-2 Menu 22: SNMP Configuration
The following table describes the SNMP configuration parameters.
Table 20-1 SNMP Configuration Menu Fields
FIELD DESCRIPTION EXAMPLE
Get Community Type the Get community, which is the password for the incoming
Get- and GetNext requests from the management station.
Public
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel: