Filter
Top Products
ZyWALL 2 and ZyWALL 2WE
4-2 Introducing the SMT
Please note that if there is no activity for longer than five minutes after you log in, your ZyWALL
automatically logs you out and displays a blank screen. If you see a blank screen, press [ENTER] to bring up
the login screen again.
Figure 4-2 Password Screen
4.3 Navigating the SMT Interface
The SMT (System Management Terminal) is the interface that you use to configure your ZyWALL.
Several operations that you should be familiar with before you attempt to modify the configuration are listed
in the table below.
OPERATION DESCRIPTION
Move down to
another menu
To move forward to a submenu, type in the number of the desired submenu and press
[ENTER].
Move up to a
previous menu
Press the [ESC] key to move back to the previous menu.
Move to a
“hidden” menu
Fields beginning with “Edit” lead to hidden menus and have a default setting of No. Press
[SPACE BAR] to change No to Yes, and then press [ENTER] to go to a “hidden” menu.
Move the cursor Within a menu, press [ENTER] to move to the next field. You can also use the
[UP]/[DOWN] arrow keys to move to the previous and the next field, respectively.
Entering
information
You need to fill in two types of fields. The first requires you to type in the appropriate
information. The second allows you to cycle through the available choices by pressing
[SPACE BAR], and then pressing [ENTER] to select your choice and move to the next
field.
Required fields All fields with the symbol <?> or ChangeMe must be filled in order be able to save the new
configuration.
N/A fields Some of the fields in the SMT will show a <N/A>. This symbol refers to an option that is
Not Applicable.
Save your
configuration
Save your configuration by pressing [ENTER] at the message “Press ENTER to confirm or
ESC to cancel”. Saving the data on the screen will take you, in most cases to the previous
menu.
Exit the SMT Type 99 at the main menu prompt and press [ENTER] to exit the SMT interface.
Enter Password : XXXX