Filter
Top Products
ZyWALL 2 and ZyWALL 2WE
Firewall Commands 61
Chart N-1 Firewall Commands
FUNCTION COMMAND DESCRIPTION
S
S
e
e
t
t
s
s
config edit firewall set <set #>
name <desired name>
This command sets a name to identify a specified
set.
Config edit firewall set <set #>
default-permit <forward | block>
This command sets whether a packet is dropped or
allowed through, when it does not meet a rule within
the set.
Config edit firewall set <set #>
icmp-timeout <seconds>
This command sets the time period to allow an
ICMP session to wait for the ICMP response.
Config edit firewall set <set #>
udp-idle-timeout <seconds>
This command sets how long a UDP connection is
allowed to remain inactive before the ZyWALL
considers the connection closed.
Config edit firewall set <set #>
connection-timeout <seconds>
This command sets how long ZyWALL waits for a
TCP session to be established before dropping the
session.
Config edit firewall set <set #>
fin-wait-timeout <seconds>
This command sets how long the ZyWALL leaves a
TCP session open after the firewall detects a FIN-
exchange (indicating the end of the TCP session).
Config edit firewall set <set #>
tcp-idle-timeout <seconds>
This command sets how long ZyWALL lets an
inactive TCP connection remain open before
considering it closed.
Config edit firewall set <set #>
log <yes | no>
This command sets whether or not the ZyWALL
creates logs for packets that match the firewall’s
default rule set.
R
R
u
u
l
l
e
e
s
s
Config edit firewall set <set #>
rule <rule #> permit <forward |
block>
This command sets whether packets that match this
rule are dropped or allowed through.