Filter
Top Products
ZyWALL 2 and ZyWALL 2WE
LAN Setup 7-7
Follow the instructions in the next table on how to configure the DHCP fields.
Table 7-3 DHCP Ethernet Setup Menu Fields
FIELD DESCRIPTION EXAMPLE
DHCP This field enables/disables the DHCP server.
If set to Server, your ZyWALL will act as a DHCP server.
If set to None, the DHCP server will be disabled.
If set to Relay, the ZyWALL acts as a surrogate DHCP server and
relays requests and responses between the remote server and the
clients.
When set to Server, the following items need to be set:
Server
Configuration:
Client IP Pool
Starting
Address
This field specifies the first of the contiguous addresses in the IP
address pool.
192.168.1.33
Size of Client
IP Pool
This field specifies the size, or count of the IP address pool. 32
Primary DNS
Server
Secondary
DNS Server
Type the IP addresses of the DNS servers. The DNS servers are
passed to the DHCP clients along with the IP address and the subnet
mask.
DHCP Server
Address
If Relay is selected in the DHCP field above, then type the IP address
of the actual, remote DHCP server here.
Follow the instructions in the following table to configure TCP/IP parameters for the LAN port.
Table 7-4 LAN TCP/IP Setup Menu Fields
FIELD DESCRIPTION EXAMPLE
TCP/IP Setup:
IP Address Enter the IP address of your ZyWALL in dotted decimal notation 192.168.1.1
(default)
IP Subnet Mask Your ZyWALL will automatically calculate the subnet mask based
on the IP address that you assign. Unless you are implementing
subnetting, use the subnet mask computed by the ZyWALL.
255.255.255.0
RIP Direction
Press [SPACE BAR] and then [ENTER] to select the RIP direction.
Options are: Both, In Only, Out Only or None.
Both
(default)