Filter
Top Products
ZyWALL 2 and ZyWALL 2WE
27-10 VPN/IPSec Setup
Table 27-7 Basic IKE VPN Rule Setup
LABEL DESCRIPTION
My IP Address
Enter the WAN IP address of your ZyWALL. The ZyWALL uses its current WAN IP
address (static or dynamic) in setting up the VPN tunnel if you leave this field as
0.0.0.0.
The VPN tunnel has to be rebuilt if this IP address changes.
Local ID Type
Select IP to identify this ZyWALL by its IP address.
Select DNS to identify this ZyWALL by a domain name.
Select E-mail to identify this ZyWALL by an e-mail address.
Local Content
When you select IP in the Local ID Type field, type the IP address of your computer or
leave the field blank to have the ZyWALL automatically use its own IP address.
When you select DNS in the Local ID Type field, type a domain name (up to 31
characters) by which to identify this ZyWALL.
When you select E-mail in the Local ID Type field, type an e-mail address (up to 31
characters) by which to identify this ZyWALL.
The domain name or e-mail address that you use in the Content field is used for
identification purposes only and does not need to be a real domain name or e-mail
address.
Secure Gateway
Address
Type the WAN IP address or the URL (up to 31 characters) of the IPSec router with
which you're making the VPN connection. Set this field to 0.0.0.0 if the remote IPSec
router has a dynamic WAN IP address (the Key Management field must be set to
IKE). The remote address fields do not apply when the Secure Gateway Address
field is configured to 0.0.0.0. In this case only the remote IPSec router can initiate the
VPN.
Peer ID Type
Select IP to identify the remote IPSec router by its IP address.
Select DNS to identify the remote IPSec router by a domain name.
Select E-mail to identify the remote IPSec router by an e-mail address.