Filter
Top Products
Chapter 7 Storage
NSA320 User’s Guide
161
7.2.2 Storage Screen
Click Storage > Volume in the navigation panel to display the following screen.
Use this screen to display internal and external volumes on the NSA.
Note: It is recommended to scan the volume every three months or 32 reboots.
Figure 75 Storage > Volume
The following table describes the labels in this screen.
Table 21 Storage > Volume
LABEL DESCRIPTION
Internal/External
Volume
These tables display information on all internal volumes (created
on NSA internal disk drives) and external volumes (created on
external disk drives attached to the NSA USB ports).
Create an Internal
Volume
Click this to format internal hard drives and create a new
volume. All data on the disk(s) will be lost.
Create an External
Volume
Click this to format an external hard drive and create a new
volume. All data on the disk will be lost.
Status This field shows whether the volume is Healthy, Resync,
Recovering, Degraded, or Down. See Section 7.3.1 on page
164 for details on a volume’s status.
Volume The NSA creates the volume name automatically. You can edit it.
Disk Configuration This field shows which disks and data storage system the
volume is using.
File System This field displays the file system that an external (USB) volume
is using.
Disk(s) Click or roll your mouse over a link in this column to display the
following details about the hard drive located in the
corresponding hard drive bay.
Type: Whether it is an internal or external (USB) hard drive.
Model Name: This is the hard disk number that identifies the
disk.
File System: The file system that an external volume is using
Capacity: The total storage space on the disk.